Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 82522 | PUGET SOUND NAVAL SHIPYARD AND INTER |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| AKTM | FIRST END SLOT WIDTH | 0.188 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SLOTTED |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| ATPC | STEP QUANTITY | 2 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-20166,GR M MIL SPEC SINGLE MATERIAL RESPONSE |
| AMFZ | SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | FIRST END SLOTTED AT A 15 DEG ANGLE TO C LINE ON BOTH SIDES OF SLOT |
| ABHP | OVERALL LENGTH | 6.000 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL |
| AMDW | FIRST END SLOT DEPTH | 0.312 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.6250 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL |